Skip to APEX ONE details
pixels2pavementDesign your build
P2P APEX ONE concept with six-axis motion platform, triple displays, active harness and P2P PC on an illuminated mat

THE 6DOF FLAGSHIP

APEX ONE.

Every axis.
Every sensation.

Our most immersive racing configuration. Qubic System six-axis motion, active belt feedback and a complete P2P performance system, custom built around you.

QUBIC SYSTEM QS-S35 / P2P APEX ONEPROPOSED CUSTOM BUILD · CONCEPT VISUAL
6DOF MOTION+ACTIVE HARNESS+TRIPLE DISPLAYS=ONE COMPLETE EXPERIENCE

01 / BEYOND THE COCKPIT

A new dimension of immersion.

Feel the whole
experience.

The QS-S35 moves the driver’s environment across six axes. A wraparound view, three active pedals and a tensioned harness bring the reference build together.

APEX ONE six-axis simulator concept with triple 32-inch displays and a fitted harness
P2P APEX ONEDesign concept · final components and finishes are individually specified.
6 DOFMOTION ARCHITECTURE
35 NmDIRECT-DRIVE REFERENCE
3 × 32″INTEGRATED DISPLAYS
QS-BT1ACTIVE BELT FEEDBACK
Motion foundation

Qubic System QS-S35

Six actuators deliver pitch, roll, yaw, surge, sway and heave. The upper cockpit carries the seat, controls and displays together, with integrated Motion-Lock and QS-BT1 mounting.

Component reference
Direct drive

Simucube 3 Ultimate · 35 Nm

The 35 Nm reference wheelbase, specified with the required Simucube Link Hub and Link Quick Release. Torque and response are tuned to the driver.

Component reference
Steering wheel

Bavarian Sim Tec OmegaPRO v2

A premium GT / Formula wheel at the center of the build. Wheel connection, quick-release adapter and cable routing are confirmed as one complete assembly.

Component reference
Active pedals

Simucube ActivePedal Ultimate × 3

Active brake, throttle and clutch, with programmable travel and resistance. Telemetry effects are configured for supported titles, with the required power and Link hardware included.

Component reference
Active harness

Qubic System QS-BT1

Dual-channel belt tension for braking and cornering cues, rated up to 200 N per channel. A fitted professional harness, dedicated bracket and Motion-Lock integration complete the specification.

Component reference
Wraparound vision

Three 32-inch displays

A 1440p / 165 Hz reference for each screen, mounted on the QS-S35’s integrated triple-display structure. Panel models, alignment and field of view are finalized for your build.

Component reference
Performance computing

P2P Signature PC

RTX 5090 graphics, Ryzen 9 9950X3D2, 64 GB DDR5 and 8 TB of storage. Our branded tower is configured and tested with your chosen simulator titles.

Explore the P2P PC
Shifting & control

BDH H2SQ + Heusinkveld Handbrake

H-pattern and sequential shifting, plus a separate handbrake for rally and drift. Mounting and reach are tailored to the driver.

Component reference
The finishing details

A complete driver environment

Carbon-shell bucket seat, 7.8-inch telemetry display, Elgato Stream Deck +, keyboard mount and 5.1 audio. P2P finishes and a neon-trim display mat complete the concept.

02 / YOUR DISCIPLINE. YOUR SETUP.

Racing first.
Flight by design.

Start with the racing specification above. For flight, we scope a dedicated control layout and software profile around the same motion foundation.

Race ready

Driver fit, wheel force, pedal feel and motion profiles tuned as a complete experience.

Flight configuration

Yoke or HOTAS, rudder pedals and aircraft-specific mounts can be quoted as an alternative or additional setup.

Your feedback

Motion and belt effects configured for supported games, with repeatable profiles for each driver.

Complete handover

Assembly, cable management, software setup, calibration and an operating walkthrough scoped into your proposal.

03 / MAKE ROOM FOR APEX ONE

A considered
installation.

We review access, floor construction, power and the full motion envelope before finalizing your build.

Room, floor & access

Qubic lists the platform at approximately 1.91 m long × 2.01 m wide × 2.05 m high and 475 kg before the final build is specified. The base requires floor anchoring. These are product dimensions, not a minimum room size; operating clearance, screens, access and service space are assessed separately.

Power & commissioning

The manufacturer’s standard requirement is 220–240 V. Site electrical requirements, the PC and displays, anchoring and installation scope are confirmed before delivery.

What your proposal includes

Your exact hardware list, driver fit, professional harness, motion and control setup, software licenses, delivery or installation, handover and support scope. Final availability and lead time are confirmed in writing.

QS-S35 installation reference

COMMISSION YOUR APEX ONE

Your world.
In full motion.

YOUR COMPLETE TURNKEY SIMULATOR

Custom built for your driving, your space and your ambitions.

Get your bespoke quote
Compare the APEX collection

Opens an email draft to simrcr@pixels2pavement.com. Every APEX ONE is individually specified and quoted.